Crestron-electronic DIN Rail Control Processor DIN-AP2 Manuel d'utilisateur télécharger pdf (Page 12)

DIN Rail Control Processor Crestron DIN-AP2

Connectors, Controls & Indicators

# CONNECTORS

CONTROLS &

INDICATORS

DESCRIPTION

1 I/O VERSIPORTS 1-8 (1) 9-pin 3.5mm detachable

terminal block comprising (8)

digital input/output or analog

input ports (referenced to GND)

Max Wire Size: 1.5 mm

(16 AWG)

Digital Input:

Rated for 0-24 Volts DC

Input Impedance 20k ohms

Logic Threshold: 1.25 Volts

Analog Input:

Rated for 0-10 Volts DC,

protected to 24 Volts DC

maximum

Input Impedance 20k ohms

Digital Output:

250 mA sink from maximum

24 Volts DC, catch diodes

for use with “real world”

loads

Programmable 5 Volts, 2k ohms

pull-up resistor per input

2 PWR LED (1) Green LED, indicates power

supplied to unit via NET port

3 NET LED (1) Yellow LED, indicates

Cresnet bus activity

(Continued on following page)

8 • DIN Rail Control Processor: DIN-AP2 Operations & Installation Guide – DOC. 6662A

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 39 40

Pas de commentaire

Crestron-electronic DIN Rail Control Processor DIN-AP2 Manuel d'utilisateur Page 12