Crestron-electronic QM-FTCC Manuel d'utilisateur télécharger pdf (Page 19)

Crestron QM-FTCC QuickMedia™ FlipTop Computer Center

Setup

Network Wiring

When wiring the Cresnet

network, consider the following:

• Use Crestron Certified Wire.

• Use Crestron power supplies for Crestron equipment.

• Provide sufficient power to the system.

CAUTION: Insufficient power can lead to unpredictable results or damage

to the equipment. Please use the Crestron Power Calculator to help calculate

how much power is needed for the system (www.crestron.com/calculators

• For larger networks, use a Cresnet Hub/Repeater (CNXHUB) to maintain

signal quality.

For more details, refer to “Check Network Wiring” which starts on page 34.

QuickMedia Wiring

The Crestron QuickMedia cable (sold under the name “CresCAT-QM”) contains one

CAT5E cable and one Cresnet cable in Siamese jackets. Installation of any QM

device is as simple as installing CresCAT-QM wires from the output of one device to

the input of another. Installations are flexible, affordable and fast. For more

information, refer to the latest revision of the Crestron MediaManager Applications

Guide (Doc. 6244), which is available for download from the Crestron website

(www.crestron.com/manuals

CresCAT-QM Cable

CresCAT-QM

Cable

NOTE: Do not untwist the two wires in a single pair for more than 1/3-1/2”

(0.84-1.27 cm) when making a connection. The twists are critical to canceling out

interference between the wires.

Operations & Installation Guide – DOC. 6313B QuickMedia™ FlipTop Computer Center: QM-FTCC • 15

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 47 48

Pas de commentaire

Crestron-electronic QM-FTCC Manuel d'utilisateur Page 19